Century Heating Wood Insert - CB00022

Our series of wood-burning stoves and inserts with a classic look goes straight to the point to quickly provide you with all the heat you need in cold weather or in the event of a power failure. Century Heating appliances can be found in your garage, chalet, basement or even in your living room. They are among the most ecological on the market and provide you with real savings in firewood.

SPECIFICATIONS:

General Features:

Appliance Performance:

• This appliance is officially tested and certified by an independent agency.
• Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
• Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
• The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
• As measured per CSA B415.1-10 stack loss method.
• Higher Heating Value of the fuel.
• Lower Heating Value of the fuel.
• Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
• Optimum overall efficiency at a specific burn rate (LHV).
• The optimum heat transfer efficiency is for the low burn rate and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
• Carbon monoxyde.

Clearances:

• Minimum clearances to combustibles*
• (Data expressed in inches. 1 inch = 25.4 mm)

PRODUCT MANUALS:

• Installation and user’s manual
• Appliance dimensions