Dovetail red dot sight mount for Glock. Compatible with red dot sights featuring the DeltaPoint Pro and Shield RMS/RMSc footprint (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & many more). The rear pins will need to be removed on the Holosun 407K/507K.

Compatibility

• Glock 17
• Glock 17L
• Glock 19
• Glock 19x
• Glock 20
• Glock 21
• Glock 22
• Glock 23
• Glock 24
• Glock 26
• Glock 27
• Glock 29
• Glock 30
• Glock 30 SF
• Glock 31
• Glock 32
• Glock 33
• Glock 34
• Glock 35
• Glock 36 (Our mount is wider than the slide, but it will still work)
• Glock 37
• Glock 38
• Glock 39
• Glock 41
• Glock 42 (Our mount is wider than the slide, but it will still work)
• Glock 43 (Our mount is wider than the slide, but it will still work)
• Glock 43x (Our mount is wider than the slide, but it will still work)
• Glock 44
• Glock 45
• Glock 46
• Glock 48 (Our mount is wider than the slide, but it will still work)
• Canik TP9 SF
• Canik TP9 SA
• Bersa BP9CC
• Tactical Solutions .22lr Conversion
• Advantage Arms .22lr Conversion
• PSA Dagger (NON-optics ready)
• Does NOT FIT ANY/ALL Glock MOS models.
• Does NOT FIT ANY/ALL Glock slides that are already cut for optics.
• This mount will also fit the NON-optics ready PSA DAGGER

Specifications

• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.604"
• Overall Width: .99"
• Dovetail Width: .375"
• Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
• Red Dot Fitment:

• Bushnell RXS-100
• Bushnell RXS-260
• Bushnell RXU-200
  
• Crimson Trace CTS-1500
• Holosun 407K*
• Holosun 507K*
• Jpoint
• Leupold DeltaPoint Pro
• Optima
• Redfield Accelerator
• Shield RMS
• Shield RMSc
• Shield SMS
• Sig Romeo Zero
• Vortex Defender-CCW

* With modification. The rear two locator pins on the plate must be filed off in order to allow the 407K/507K to fit.

Installation

EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with the adapter plate in order to mount your red-dot sight. You can take our mount off and replace your rear sight at any time.

• Remove the rear sight
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (Tip: A small piece of paper between the red dot sight and the mount will make for easier removal and will keep Loctite off of the red dot sight)
• Apply blue Loctite #242 threadlocker to the provided mounting screws
• Torque mounting screws to 15in/lbs

EGW red dot mounts  are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.