Will the wing interfere with my trunk lid closure?

The RBS profile is designed to clear factory trunk travel. Verify clearance before final installation by dry-fitting the three pieces and checking the lid swing path. If you've modified your trunk or added weight, test fit first.

What's the mounting hole pattern for attachment points?

Reference your vehicle's OEM trunk area to identify bolt locations and any pre-drilled holes. The three-piece design allows you to position end plates to match factory or aftermarket reinforcement points. Use a drill template or existing holes as your guide.

How do I prep and finish the FRP before installation?

Sand the surface with appropriate grit to promote paint adhesion. Apply your chosen primer and topcoat system. Allow adequate cure time between coats before mounting to the vehicle. FRP accepts most automotive paint finishes when properly prepped.