Will this wing interfere with my trunk lid or hatch?

This spoiler is designed for standard trunk clearance on your vehicle. Before installation, open your trunk fully and verify the wing mounting location does not obstruct the lid's upward travel. Mark fastener holes with tape to ensure proper alignment with your existing OEM mounting points.

What mounting hole pattern does this spoiler use?

This wing uses factory mounting locations for your vehicle. Verify existing holes or drilling locations by dry-fitting the spoiler against your trunk first. Do not drill until you've confirmed alignment — reference your OEM service manual for hole spacing if you need to create new fastener points.

How should I prepare and finish the FRP surface?

Sand the surface with appropriate grit to promote adhesion, then clean thoroughly before applying your chosen epoxy primer or paint system. FRP performs best when fully sealed and topcoated — bare FRP will absorb UV and moisture over time. Allow all coats to cure per your paint manufacturer's timeline before exposing the wing to rain or car washes.