Technical Information:

• Compressive Strength: 180 MPa
• Flexural Strength: 170 MPa
• Hardness (by Barcol): 80
• Water Absorption Capacity: 12 μg/mm³
• Solubility: 7 μg/mm³
• Adhesive Bond Strength to Enamel Without Etching: 20 MPa
• Adhesive Bond Strength to Bovine Dentin Without Etching: 15 MPa
• Adhesive Bond Strength to Rexillium: 20 MPa
• Film Thickness: 10 μm
• Radiopacity (% Aluminum): 250
• Fluoride Release (Cumulative in 1 Week): 40 ng/cm²
• Working Time: 2 minutes
• Setting Time: 3.5 minutes
• Compatibility with Halogen Light: Yes
• Compatibility with Plasma Arc Light: Yes
• Compatibility with LED Light: Yes

Features:

1. Moisture Condition for Application:
   Before applying TotalCem, dentin should be dry, but not overly dry.

2. Enamel Etching:
   For inlays and onlays, it is recommended to etch the enamel margins with phosphoric acid to enhance bond strength, ensuring the acid does not spread onto the dentin.

3. Root Canal Cleaning for Optimal Cementation:

   • Use a calibrated drill to remove all gutta-percha residues.
   • Clean with an ultrasonic probe.
   • Rinse thoroughly and dry properly.

4. Application with Intraoral Tips:
   TotalCem should be applied using ultra-thin intraoral tips for precision.

5. Mechanical Support Required for Enamel Bonding:
   TotalCem is not developed for bonding directly to enamel without mechanical support (e.g., dental brackets or veneers).

6. Cementation of Ceramic or Zirconium Restorations:
   To improve cementation, follow this procedure:

   • Apply hydrofluoric acid for 1 to 3 minutes.
   • Rinse thoroughly.
   • Apply silane (e.g., DentoBond Porcelain Fix).

Packaging:

3 x 8 g