This aluminium inlet manifold is a direct replacement for the stock plastic inlet manifold which allows the use of the stock charge cooler but adds an addional 6 x 1000cc Bosch motorsport injectors which provide enough additional fuel for over 1000hp and allows the user to safely boost more than 34psi safely, as the stock plastic inlet manifold often fails around or above that level.There is a 3 x 1/8th NPT and a 3/8th NPT distribution plate for boost references added. This inlet also deletes the evaporation circuit to the air intake for a cleaner, more efficient running operation. There are also 2 billet machined adapters to incorporate the factory water pipes, so installation is easy and straightforward.

The low profile of the injection system also means that the factory engine cover fits correctly without modification. The user will need to add a low pressure fuel pump upgrade and an injector controller, this can be provided. All installation hardware is included.

- Inlet manifold

- Phenolic spacer

- 6x1000cc Bosch motorsport injectors

- 6x EV1 injector plugs

- Billet 2 port fuel rail

- Billet water pipe adapters

- All necessary hardware

- AN6 fuel line adapter