PSEOH-10SL   Our 10,000 Overhead lift is a commercial grade 2 Post Lift made for professional and home mechanics. The hybrid Symmetric / Asymmetric arm design allows this lift to function as an all in one versatile lift solution - You Get 2 Lifts In 1! This lift is perfect for high volume professional shops & garages.

Overhead lifts like this model are the design of choice for many professional mechanics because it leaves a clear floor underneath the lift. This makes moving tools such as Oil Drains, Transmission Jacks, Safety Stands / Jack Stands and other equipment under vehicles very easy.

The PSEOH-10SL 10,000 LBS Overhead lift also includes a 4 pc. set of screw-up style drop-in lifting adapters, a powerful 220V hydraulic power unit, key security, SINGLE POINT safety lock release system, powder coat finish, & all installation hardware.

PRODUCT DETAILS:

Product Features:

• Overhead Padded Safety Cut-Off Bar: This padded Cut-Off Bar stops lifting to prevent damage to vehicles.
• Adjustable Column Height: The Column design on the PSEOH-10SL 10,000LBS Overhead Lift is set for a installed height of 140 1/16"  allowing for a height that will fit in almost any 12 ft ceiling. We shortened it by 3 inches so you should never need to modify or fabricate the Lift to fit in any 12 ft garage.
• Hybrid Symmetric & Asymmetric Design: Our versatile arm design allows this lift to lift vehicles 50/50 AND 30/70! YOU GET 2 LIFTS IN 1!
• Heavy Duty Arm Construction: The PSEOH-10SL 10,000 LB. two post lifts feature two 3-stage front arms and two 2-stage rear arms overbuilt to handle high volumes and high weight loads.
• Single Point Lock Release: This single control for releasing the security locks makes lowering the lift faster and increases productivity!
• 220V Power Unit: Our powerful 220V Power Units are manufactured to strict specifications and increase speed & durability for all Pro-Series Equipment lifts!

SHIPPING INFORMATION:

Packaging Information:

This equipment weighs approximately 1,750 LBS. If you have any questions or would like more information on this equipment, Call 1-800-708-3126 to speak to a Pro-Series Equipment rep today.

Shipping Process:

This equipment will ship as a FREIGHT item via LTL common carrier. The customer is responsible for providing a shipping address that will be able to accept the shipment. Customers are responsible to ensure that the shipping address provided will be able to accomodate a large 18 wheel truck pulling into the drive / dock without any problems.

It is also the responsibility of the customer to unload the equipment from the truck when it is delivered. Due to the size and weight of the equipment, a forklift or wrecker boom will be required!

If the customer is unsure if the truck will be able to unload the shipment on their drive, and they do not have access to a commercial dock, it is strongly recommended that the equipment be delivered to a trucking terminal in the customer's area. The terminal staff will be able to unload the equipment from the trailer and load it onto a truck or trailer at no additional cost.

For more information on shipping policies for Pro-Series Equipment, click here.

INSTALLATION OVERVIEW:

This lift will come packaged between two steel shipping plates. The Power Unit will be banded to the lift, and all of the components, hardware and anchor bolts will be packaged inside the lift columns.

Required Tools & Materials:

You will need the following items in order to install this lift:

Concrete Rotary Hammer Drill w/ ¾" Carbide Bit, Rubber Hammer, 2 LB. Sledge Hammer, Chalk Line & Square, Socket Wrenches, Open End Wrenches, Ratchet Driver, Locking Pliers, Measuring Tape, Screwdrivers, Torque Wrench, Step Ladder, 4' Bubble Level, & 12" Adjustable Wrench.

You will also need to have 3 Gallons of AW-32 non-foaming, non-detergent Hydraulic Fluid.

Electrical Requirements:

This lift requires a 220V, Single Phase power supply on a dedicated 20 AMP circuit breaker. All electrical wiring for this lift should be done by a certified electrician!

Concrete Requirements:

The lift should be installed on a level floor with a minimum of 4" - 6" of 3,000 psi concrete (sufficiently cured). If you are unsure of the thickness of the concrete, it is best to test drill where the lift is to be installed to verify the depth of the concrete.

Installation Overview:

The instructions in the included manual should be carefully followed step by step. Our lifts are often installed by our customers, and usually will take from 4-5 hours to finish. Professional lift installation services are likely available in your area for a fee, please consult your sale representative if you are interested in learning more!