Additional Features:

• Type: RG58C/U
• Cable Assembly with BNC Male on Each End
• 50 ohm cable makes it ideal for most test and measurement applications, RF transmission systems and Thinnet LAN application
• The molded strain relief is directly bonded to the cable jacket for superior strength and durability
• Teflon insulation and nickel tarnish resistant outer shells used in the BNC connector provide long life and reliability
• Gold plated center contacts assure the most noise free connection possible
• The connectors and cable are impedance matched
• Voltage: 500 Vrms max from center conductor to shield and 33 Vac / 70 Vdc max from shield to earth in controlled hands free testing environments. For CE compliance: not intended for hand-held use at voltage above 33 Vrms / 70 Vdc.

Specifications:

• Impedance: 50 Ω
• Capacitance per 1 foot/0,304 meters: 30.8 pf
• Power Loss/100 Ft @ 1 MHz: 0.44 dB
• Insulation: Polyethylene
• American Wire Gauge: 20
• Center Strands X AWG: 19 X 36
• Wire Type: Tinned Copper
• Jacket Material: Polyvinyl Chloride Non-Contaminating
• Cable OD: .195
• Shield: Tinned Copper Braid
• Temperature (w/o connectors) °C: -40 to +85

Materials:

• BNC Male:
• Body: Brass, Tarnish Resistant Nickel Plating
• Dielectric: PTFE
• Center Contact: Gold Plated Brass
• Strain Relief: PVC molded directly to cable and connectors

Applications:

• Test & Measurement, RF Communications, Communications & Networking, Electronics Design, Electronics Service, Computer Hardware, Instrumentation, Instrumentation

The 2249-C-120 is a 120-inch RG58C/U RF/Coaxial Cable Assembly with BNC male to BNC male connectors, PE insulation, tinned copper wire type, polyvinyl chloride non-contaminating (PVCNC) jacket and tinned copper braid shield. The moulded strain relief is directly bonded to the cable jacket for superior strength and durability. PTFE insulation and nickel tarnish-resistant outer shells used in the BNC connector provide long life and reliability. Gold-plated brass center contacts assure the most noise free connection possible. The connectors and cable is impedance matched.