Parts Shop Max Rack to inner tie rod Forward offset spacer S13 Mfg. Date 7/1988 - 7/1990

Listing is for:
1x Pair of steering rack spacers

Fits early model S13 Silvia, 240SX,180SX.
This CNC steel offset spacer adjusts the pivot point of the inner tie rod forward 36mm and features a black zinc coating.
It is for cars with high caster setting and high steering angle that causes severe over centring making the steering wheel hard to turn as the tie rod looses leverage at full lock.
This offset spacer does cause some stress on the steering rack itself so for all but the most extreme caster setting the eccentric steering rack bushing or Rack Relocation is the preferred method of reducing overcentering on s chassis with angle modified steering knuckles.
Sold by the pair.
*If used with eccentric rack bushings (4-5mm forward) you must grind the FLCA mounting nut/bolt in half.
**INSTALLER MUST VERIFY POSITION OF NOTCHES IN THE END OF THE STEERING RACK.
S13 OFTEN HAS NON-ORIGINAL RACK AND MAY REQUIRE LATER MODEL RACK SPACERS.